LE_RFID-125k – RFID reader of identification cards
In stock
Basic specifications
Technical parameters
- Supply voltage: 5 V
- Consumption: 50 mA
- Reverse polarity protection
- RFID frequency: 125 kHz
- Supported protocol: EM4100
- Sound signalization
- Range: 40 mm
- Weight: 50 g
- Dimensions: 54×18×56 mm
Marking of conductors
1 White | DATA0 |
2 Brown | DATA1 |
3 Green | +VCC |
4 Yellow | GND |
5 Gray | BEEP (beeper) |
6 Pink | 1WIRE |
Installation
Mounting the reading device is very simple. It is installed from the inside of the instrument panel, in which we do not even have to make a hole. The main fastening element is a double-sided adhesive tape from which the protective film is torn off and stuck with the product to the desired place. If we want to secure the device 100% against falling, it is necessary to make a hole for a 4 mm screw in the dashboard. The screw can be metal. A screw may reduce the reader’s reading capabilities, but due to its size, its effect is negligible. Do not install the product near metal materials, it affects the sensitivity of the RFID receiver. Plastic and wooden obstacles have almost no effect on the range of the reader. The product cannot be operated under or outside a metal (iron, aluminum, copper, …) cover. The product is intended for assembly in combination with other flight devices that support its function. The identification card is not part of the product, it must be purchased separately.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified product.