LED reflector for UL aircraft
Reflector Landing Star T1 – square
Part no.: ART16394
The Landing Star T1 square LED reflector is primarily designed to illuminate the aircraft path during landing, taxiing and take-off. It is intended for installation in the wing of an airplane behind to the cover glass. Application: Any aircraft with a nominal onboard voltage of 12 V. The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential).Within 3 weeks
Basic specifications
Technical parameters
- Supply voltage: 8 ÷ 18 VDC
- Current consumption: 1A @ 12V
- Power consumption: 12 W
- Luminous flux: 900 lm
- Beam angle: 25 ° and 10 °
- Protection against reverse polarity and overheating
- Dimensions: 92×92×17 mm
- Weight: 125 g
Marking of conductors
| +12V | positive battery supply |
| GND | ground |
Shield left floating
Installation
The product has 4 holes with a diameter of 4 mm. The product can be fixed either with rivets or screws to diametral size 3,8mm. Warning! The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential). The product must be covered with transparent cover glass.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified light.
The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential).
