CTRDP – Single channel servo driver the trimming of the aileron or pitch
The CTRDP is a single channel power servo driver. Compared to the CTRD2 version, it can handle higher current switching: max. 4 A with a switched power of max. 120 W. CT Relay Deck Power is connected into the circuit between the stick buttons and the trim servo. Pressing a button activates the CTRDP, which powers the servo in the required polarity; releasing the button stops the movement. Trimming is used mainly to make the aircraft easier to control (e.g. in wind). The product controls only one channel, so to control both trimming systems it is necessary to install two units. It weighs 49 g and supports the possibility of connecting a servo speed controller.
Basic specifications
Technical parameters
- Supply voltage: 12/24 V
- Power consumption 0–1.2 W (typ. 0.35 W)
- A separate power supply wire of relays and control signals (GND common)
- Switching voltage: 5–30 V
- Switching current: max. 4 A
- Switched power: max. 120 W
- Number of channels: 1
- The possibility of connecting a servo speed regulator
- Electrical life of the switch: 100 thousand cycles
- Protection against reverse polarity and spikes when the relay is turned off
- Weight: 49 g
- Dimensions: 41×44×27 mm
Marking of conductors
| BLACK – GND | male |
| GREEN – SERVO_2 | female |
| BROWN – SERVO_1 | female |
| BLUE – STICK_GRIP_2 | male |
| PINK/ORANGE – STICK_GRIP_1 | male |
| RED – +VCC | male |
| YELLOW – +VCC_SERVO | male |
Installation
With its small size of 41 × 44 × 27 mm and special shape, the product is ideal for installation in a UL aircraft. It is mounted either on the surface or can be recessed into the board. Fixing is done with screw sizes up to 3 mm. The electrical connection is made by a protruding colored cable harness.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified product.








