LED reflector for UL aircraft
Reflector Landing Star T2 – circular
Part no.: ART08240
The Landing Star T2 circular LED reflector is primarily designed to illuminate the aircraft path during landing, taxiing and take-off. It is intended for installation in the wing of an airplane behind to the cover glass. Application: Any aircraft with a nominal onboard voltage of 12 V. The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential).Within 3 weeks
Basic specifications
Technical parameters
- Supply voltage: 8 ÷ 18 VDC
- Current consumption 1A @ 12V
- Power consumption: 12 W
- Luminous flux: 800 lm
- Beam angle: 13 °
- Protection against reverse polarity and overheating
- Dimensions: 90×12 mm
- Weight: 88 g
Marking of conductors
| +12V | +12V positive supply from battery |
| GND | Ground |
Shield left floating
Installation
The product has 4 holes with a diameter of 4 mm. The product can be fixed either with rivets or screws. Warning! The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential). The product must be covered with transparent cover glass. Only 2 power supply wires (VCC and GND) are connected to the electric installation.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified light.
The metal body of this product must be isolated from grounded metal parts of the aircraft (not connect to any electrical potential).
