LED reflector for UL aircraft
Reflector Landing Star T4 – rectangle
Part no.: ART14597
The Landing Star T4 rectangular LED reflector is primarily designed to illuminate the aircraft path during landing, taxiing and take-off. It is intended for installation in a narrower type of wing (compared to other versions) of the airplane behind to the cover glass. Application: Any aircraft with a nominal onboard voltage of 12 V. The metal cover can be grounded or left floating.Within 3 weeks
Basic specifications
Technical parameters
- Power supply: 9 ÷ 15 VDC
- The light is resistant to reverse polarity of the supply voltage
- Current consumption: 1.27 A
- Power consumption: 12 W
- Luminous flux: 1512 lm (cool white)
- Emitting light angle: 25 ° and 10 °
- The reflector can be connected to an external WIG-WAG switch
- Overheating protection
- Overvoltage and undervoltage protection
- Dimensions: 189×17×51 mm
- Weight: 150 g
Marking of conductors
| +12V | positive battery supply |
| GND | ground |
Shield grounded or floating
Installation
The product is attached using 4 screws or rivets with a diameter of 3 mm behind the transparent cover glass. The metal body of the reflector can be conductively connected to the grounded parts of the aircraft or left be floated. Only 2 power supply wires (VCC and GND) are connected to the electric installation.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified light.
The metal body of this product can be connected to the metal earthed part of the aircraft (GND potential) or can be isolated.
