Accessories for controlling interior lighting and signaling
Two-channel PWM dimmer – Doubledimmer
Part no.: ART13273
The Doubledimmer device is a two-channel adjustable dimmer for independent control of two PWM channels. PWM is set on the dimmer with a high quality rotary potentiometers. One channel can be used, for example, to control the signaling lights and the other to set the dashboard backlight. The controllability of the channels is in the range OFF, 1 ÷ 100%. PWM dimmer is + type (switches VCC potential). Replaceable front label.In stock
Basic specifications
Technical parameters
- Power supply: 8 ÷ 18 VDC
- The device is resistant to reverse polarity of the supply voltage
- Current consumption (OFF): 5 mA
- Output channel current load: 3 A
- PWM frequency: 122 Hz
- PWM regulation: 1 ÷ 100%
- Protection of overvoltage and exceeding the maximum current
- Overheating protection
- Dimensions: 40×78×28 mm
- Weight: 60 g
Marking of conductors
| VCC | power supply + |
| GND | ground |
| OUT1 | output plus channel 1 |
| GND1 | output minus channel 1 |
| OUT2 | output plus channel 2 |
| GND2 | output minus channel 2 |
Installation
The assembly of the product is carried out by building it into the panel. First, the electrical signals are connected to the terminal board of the device, and we can proceed to the mechanical installation. All you need to do is drill 3 holes for potentiometers and an M4 fixing screw in the dashboard. The device is inserted from the back side of the dashboard and fixed with an M4 screw and nut. Then put on a label, to screw the potentiometer nuts and the knobs of the potentiometers are mounted.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified product.
