Beacon Arrow Flash T2 FULL
- Beacon Arrow Flash T2 R - red left
- Beacon Arrow Flash T2 G - green right
- Beacon Arrow Flash T2 W - keel white
In stock
Basic specifications
Technical parameters
- WING BEACONS:
- Supply voltage: 9 ÷ 18 VDC
- The beacon is resistant to reverse polarity of the supply voltage.
- Current consumption (position light): 0.35 A @ 12VDC
- Current consumption (beacon): 2.5 A @ 12 VDC, pulsed on flash
- Power consumption (position light): 4 W @ 12 VDC
- Power consumption (beacon): 30 W @ 12 VDC, pulsed when flashing
- Flash repetition: 1.2s
- Dimensions: 112×33×26 mm
- Weight: 59 g
- Wire length: 280mm 20AWG
- TAIL BEACON:
- Supply voltage: 9 ÷ 18 VDC
- The beacon is resistant to reverse polarity of the supply voltage.
- Current consumption (position light): 0.25 A @ 12 VDC
- Current consumption (beacon): 2.5 A @ 12 VDC, pulsed on flash
- Power consumption (position light): 3 W @ 12 VDC
- Power consumption (beacon): 30 W @ 12 VDC, pulsed on flash
- Flash repetition: 1.2s
- Dimensions: 55×41×33 mm
- Weight: 36 g
- Wire length: 280mm 20AWG
Marking of conductors
GND | Ground |
POS. | Positive for Position / Navigation |
STR. | Positive for Strobe |
SYNC | Synchronization (optional) |
Installation
Mount the green beacon on the right wing of the UL aircraft. Mount the red beacon on the left wing of the UL aircraft. Mount the keel beacon on the top of the rudder UL aircraft. Connect the positive power supply wire to the POS and STROBE wire (we can route and turn-on it on separately or together). Furthermore, connect the negative power supply to the GND, and the SYNC signal can be connected with other beacons. If the SYNC signal is not connected, the lights flash of the beacons is out of sync with each other.
More information
This product is not approved for installation in certified aircraft. This is not a TSO certified light.