Accessories for controlling the mechanical parts of the aircraft

PI1C position indicator

Part no.: ART16402
The PI1C position indicator product is intended for indicating the position of the trim servo, flaps and other equipment of UL aircraft, which transmits this position using a 3-wire potentiometer. The PI1C variant has a discrete brightness control of 30% and 100%. When dimming is turned off (DIM=GND, or not connected), the product automatically switches to full brightness. The product recognizes 9 working positions and is also able to indicate fault conditions of position measurement (dropped, shorted wire). Horizontal or vertical positions can be used for signaling. Therefore, both label variants are supplied with the product. The subject of the order is one piece of the position indicator product.

Within 3 weeks

€125.51 €103.73 without VAT

Basic specifications

Technical parameters

  • Supply voltage: 10 ÷ 30 VDC
  • Consumption: 50mW
  • Brightness control: discreet 30 / 100%
  • PWM lost: bright set to 100%
  • Dimming signal: 4.5 ÷ 30 V
  • Discrete regulation: 100% (0V) / 30% (12V)
  • Supported position sensor: 5 kOhm or 10 kOhm
  • Weight: 20 g
  • Dimensions: 44×20×35 mm

Marking of conductors

BLACK – GND Power supply (negative)
RED V+ Power supply (positive)
ORANGE – TRIM_VCC Position sensor supply (+)
ZELENÁ – TRIM_IN Position sensor feedback signal
BLUE – TRIM_GND Position sensor supply (-)
WHITE – DIM Dimming input

Installation

The product is mounted in a prepared rectangle hole of 34.4 x 15.4 mm and two holes with a diameter of 3 mm in the dashboard of the aircraft. Wires are first connected through this rectangle hole, and then the product is inserted into the given hole and locked with a pair of screws. Finally, the respective desired label (horizontal/vertical) is stuck on the front panel.

More information

This product is not approved for installation in certified aircraft. This is not a TSO certified product.

Files

More products from category ,